EnerG H.R. Architecturaltm is a superior high performance heat reflective, thermal insulating exterior wall coating system. It is uniquely engineered to combine maximum solar reflectance and thermal insulative properties to achieve the best efficiency possible.
Optimum solar reflectance (up to 95%) is achieved by integrating true Infrared Reflective pigments. This allows solar reflectance across all color spectrums and is not limited to just white or light pastel colors. The emissive heat that passes through the topcoat is further diminished by the insulative primer. This true energy efficient coating system can reduce surface temperatures up 50° F and interior building temperatures up to 15° F.
Why Use The EnerG H.R. System: By reflecting the sun's heat energy, it never has a chance to absorb into the building. This true reflectivity significantly lowers surface temperatures and limits the amount of heat trying to enter the building thus, lowering interior temperatures.
Enjoy maximum energy efficiency & comfort during warm seasons year after year by reducing interior temperatures by up to 15 degrees. Choose the exterior paint system that pays you back.
HI-SOL & TRUE-COLOR FORMULA:
EnerG H.R. with Hi-Sol contains over 63% solids content compared to the industry average of 32%-43% for conventional architectural coatings. That means you achieve 50%-100% more film build (dry mils) over the same surface area or can achieve higher spread rates in comparison. EnerG with True-Color Fade Resistance is inert to the effects of UV light. True-Color is able to retain its original color for up to 20 years or more, significantly reducing the number of recoats over the life of the building. EnerG H.R. Architectectural has undergone extensive weather testing by Atlas Weathering Services of Arizona in accordance with ASTM G-26, receiving the highest available weatherability rating of 15 years. HIGH PERFORMANCE COATING SYSTEM:
The recommended system is comprised of the EnerG H.R. PrimeCoat Insulative Primer and the EnerG H.R. Architectural Coating. Both are available in Acrylic or Elastomeric formulations to meet your environmental and substrate requirements. Acrylic formulas are suited for most applications including the best system for high moisture environments. Elastomeric formulas are suited for one coat stucco systems or other substrates that have a tendency to crack easily.
Our high solids, high build, and fade resistance, surpasses conventional coatings with superior durability, cleanability, and life span. In addition, our energy efficiency and reduction of the heat island effect results in a coating system that pays for itself over and over again. You simply can’t afford not to specify EnerG H.R. for your exterior wall coating project.
WARRANTY: Eco Safety Products, Inc. will warranty the system up 15 years when applied by an approved licensed contractor. The warranty period is determined by the total dry mil thickness of the PrimeCoat and Architectural coatings up to 15 dry mils. Warranty period is calculated at 1 year per each dry mil. Applications by non approved contractors will be covered by our limited warranty for defective materials only. Contact ESP for warranty details.
The environmental attributes of EnerG H.R. may assist with Green Building LEED credits in the following categories:
EA Credit 1: Optimize Energy Performance EQ Credit 4: Low Emitting Material MR Credit 5: Local/Regional Materials ID Credit 1–1.4: Innovation in Design
Eco Safety Products
2921 W. Culver St., #4B Phoenix, AZ 85009
