 |
 |
 |
|
Eco-Etchtm Pro Concrete Etch & Clean Concentrate, 2 Oz Sample
New and Improved Formula! Better. Safer. Faster.
Eco-Etchtm
Pro is a water-based non-hazardous, non-corrosive, biodegradable
concentrate concrete etching and cleaning solution. This advanced
formula incorporates a custom blend of surfactants, organic minerals
and derivatives of lime extract for the most effective concrete etching
solution available. It does not contain phosphoric, hydrochloric or
muriatic acid, yet works better, safer and faster. Eco-Etch Pro is the
preferred eco-friendly and user friendly etching alternative for
interior or exterior surface preparation applications.
Clean
and etch concrete, masonry, cinder block, brick, mortar joints and
grout to properly prepare substrates for optimum penetration and
adhesion of stains, paints, industrial coatings, and sealers. Eco-Etch
Pro also removes dirt, clay, mortar deposits, rust and efflorescence. A
one step etch and clean solution that brings back a new look surface.
Eco-Etch
Pro begins to work immediately upon contact without toxic hazards or
dangerous skin burns associated with traditional acid formulas.
Eco-Etch Pro 1 Gallon size can be used in full strength or diluted up to 3:1
(makes up to 4 gallons) with water for lighter cleaning and etching
requirements. One gallon will cover up to 250 square feet. Dwell time
will vary from 1 to 15 minutes which is also affected by the dilution
ratio, porosity, and temperature. Rinsing thoroughly with water
neutralizes the etching action.
Case Pack: 6 units |
|
|
|
|
|
|
|
|
